Windows 10 Which Device Did You Plug In Popup Keeps Appearing: Stopping the Audio Jack Prompt

Windows 10 Which Device Did You Plug In Popup Keeps Appearing: Stopping the Audio Jack Prompt

A small window keeps popping up asking “Which device did you plug in?” with choices like Headphones, Headset, Speakers, or Line in. You have not touched the audio jack, or you answered it a moment ago, yet it appears again. When the Windows 10 which device did you plug in popup keeps appearing, the audio PAGODA127 SLOT driver thinks something is being connected and disconnected over and over.

This prompt comes from Realtek or similar audio drivers that detect when a plug is inserted into the headphone or microphone jack. They ask what you connected so they can set the jack correctly. If the jack detection switch inside the port is loose, dirty, or damaged, it can register phantom connections.

A worn plug, a cable that moves slightly, or a driver bug can trigger the same repeated prompts.

Disabling the pop-up, or the jack detection itself, usually stops the interruptions.

Why This Happens

The pop-up repeats for these reasons:

  • The jack’s detection switch is dirty, worn, or loose.
  • A headphone plug or cable has a poor connection.
  • The audio driver has a bug in its jack detection.
  • Front-panel audio connectors on desktops are loose inside the case.

If the pop-up appears with nothing plugged in, the jack hardware or driver is almost certainly the cause.

Start With These Basic Checks

Test the connection.

  1. Unplug the headphones and plug them in firmly once.
  2. Try a different set of headphones or speakers.
  3. Blow compressed air gently into the jack to remove dust.
  4. On desktops, use the rear audio port instead of the front panel.
  5. Choose the correct device in the pop-up and tick any “do not ask again” option if it appears.

Going a Step Further

Change the driver’s behaviour.

  1. Open Realtek Audio Console, Realtek HD Audio Manager, or your laptop’s audio app.
  2. Look for “Device advanced settings” or the connector settings.
  3. Turn off “Enable auto popup dialog when device has been plugged in.”
  4. On desktops, turn on “Disable front panel jack detection” if the front panel triggers the prompts.
  5. Update the audio driver from the PC or motherboard maker, or reinstall it.

If the jack is physically damaged, a USB audio adapter is an inexpensive workaround until repair.

A Word of Caution

Do not insert metal objects into the jack to clean it, as that can short the contacts. Download audio drivers only from the PC maker or Realtek’s official sources.

Final Thoughts

The repeated audio jack pop-up means the driver keeps detecting plug changes. Check the plug and jack, turn off the auto pop-up in the audio app, disable front panel detection on desktops, and update the driver.

By john

Leave a Reply

Your email address will not be published. Required fields are marked *